Drifting LEGO® 42096 Porsche 911 RSR + Instructions

by Tihomir | Jan 24, 2019 | Uncategorized | 29 comments

Hello BuWizz Fans. We prepared something speciqal for you:

LEGO® 42096 Porche 911 MOD powered by BuWizz.

You can download the instructions here:

http://buwizz.com/DLL_instructions/42096_motorized_chassis.lxf

29 Comments

Cheol heo on February 10, 2019 at 12:32 pm

awesome!
i wanna make my RSR like this.
how can i ??
i don`t know how many buy for making like that.

if i buy 2 pcs is it okay?
Reply
- Tihomir on February 11, 2019 at 8:28 pm
  
  1 Buwizz is enough.
  Reply
Sean on March 17, 2019 at 4:42 am

i got the instruction but it has only 156 steps so i can’t complete the Porsche.
Is there any instruction for part #2 ??
Reply
- zerobricks on April 19, 2019 at 11:30 am
  
  Hi
  
  Instructions include the additional parts needed to motorize the Porsche.
  
  Best regards
  Reply
P. on April 12, 2019 at 10:03 pm

Hello, apart the motors and Buwizz, is it necessary to buy more bricks or are those included in the set sufficient?
Reply
- zerobricks on April 19, 2019 at 11:29 am
  
  Hi
  
  You will need the additional bricks which are included in the LDD file.
  
  Best regards
  Reply
Sherine Dias on May 15, 2019 at 3:20 pm

Sir I would like to know how to configure the controller to this specific model as u have mentioned in your video on YouTube that with mixed tracked racer we can get the drift. I checked the video on the setup of a simple car but is it the same for rsr too??
Reply
- zerobricks on May 16, 2019 at 2:19 pm
  
  Hi Sherine.
  
  You can se the set-up here:
  https://youtu.be/K_sgGgjQQOw?t=16
  
  Best regards
  
  Jernej
  Reply
- zerobricks on May 24, 2019 at 1:01 pm
  
  I connected the drive motors to ports 2 and 3 and controlling them with a joypad input via tracked steer mixer.
  Lights and the fake V8 engine were connected to port 4.
  Servo motor for steering was connected to port 1.
  
  Best regards
  Reply
colin on May 24, 2019 at 6:47 am

I have already buy the additional brick and motor. How can I make the connection between motor and BuWizz? Do I connect 3 port and 4 port of the main motor? The new version software BuWizz is different from the youtube video? Can you should me the setup method? The engineer motor and light is connected together same port? Thank you very much.
Reply
- zerobricks on May 24, 2019 at 1:00 pm
  
  Hi Colin
  
  For that model I connected the drive motors to ports 2 and 3 and controlling them with a joypad input via tracked steer mixer.
  Lights and the fake V8 engine were connected to port 4.
  Servo motor for steering was connected to port 1.
  
  Application is still the same as in the video, you can download it on Google Play Store.
  
  Best regards, Jernej
  Reply
Tino Santos on January 1, 2020 at 3:06 am

Hi,

Already got the extra bricks, motors and buwizz. How do I start? Should I use first the LDD file then continue on the Lego instruction manual?

Why do I get 5 motors but the instructions only shows one motor installed?
Reply
Charlie on February 1, 2020 at 2:06 am

Your MOD looks great but I still can’t figure out the rest of the instruction, can you make me one?
Thanks
Reply
- zerobricks on February 1, 2020 at 9:39 pm
  
  Hi Charlie
  
  Unfortunately we already took apart this particular model. We did not expect this MOD to be so popular! But we will be sure to created more detailed instructions for upcoming MODs!
  Reply
Samboun on February 1, 2020 at 9:29 pm

What additional brick do I need for the Lego 42096 Porche 911 MOD by BuWizz, I don’t see it listed in the LDD file?
Reply
- zerobricks on February 1, 2020 at 9:37 pm
  
  Hi
  
  You can find the list off additional parts on our rebrickable:
  https://rebrickable.com/mocs/MOC-21709/BuWizz/42096-porsche-911-rsr-buwizz-mod
  
  Thank you!
  Reply
Sherine Dias on March 9, 2020 at 11:39 am

Sir after completing all the step from the lxf file, which is the corresponding step in the instruction manual that comes with the whole set?
Reply
Sherine Dias on March 18, 2020 at 3:15 pm

I just completed building it found all the steps from the manual. the only thing i m struggling with is the placement of the lights.
i would like to upload a picture of the completed set. it was a very lovely experience building this MOC.
Reply
ricouyalaire on June 16, 2020 at 9:58 am

hello which version do you use of lego digital designer, because it deletes me 46 pieces when opening the file I have version 4.3
I made a screenshot if necessary.
Reply
- zerobricks on June 16, 2020 at 11:23 am
  
  Hi
  
  Use LDD version 4.3.11. Anything above that version is broken.
  
  Best regards
  Reply
Sherine Dias on August 25, 2020 at 10:42 pm

Is there a project file like the doms charger that we can directly upload in the buwizz app! Which will help with the configuration of the the 4 different ports for controlling the car?
Reply
Alvaro Alonso on October 28, 2020 at 12:10 pm

Hello, I’m interested in this MOC, and I have seen at the video that with the plastic wheels experience could be better, but I can´t find the reference for those platic wheels.

Could you please give me that reference?

Thank you.
Reply
- zerobricks on November 5, 2020 at 10:54 am
  
  Hi
  
  You can find the plastic wheels here:
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=44777&idColor=11#T=C&C=11
  
  Best regards
  Reply
Andrei Cristi Tanase on November 30, 2020 at 3:56 pm

Hey, how do i save the file? It just redirects me on a site with weird symbols
Reply
- Tihomir on January 14, 2021 at 12:44 pm
  
  Try a different browser. It works on Chrome.
  Reply
  - Jurgen_Dep on April 12, 2021 at 10:27 pm
    
    download link https://buwizz.com/buwizz/DLL_instructions/42096_motorized_chassis.lxf doesn’t work
    Reply
    - Tihomir on April 13, 2021 at 4:19 pm
      
      Now we fixed it: https://buwizz.com/DLL_instructions/42096_motorized_chassis.lxf
      Reply
Jim on April 4, 2024 at 3:03 pm

2024 anyone? Unfortunately, link doesn’t work.
Reply
- Tihomir on May 28, 2024 at 9:16 am
  
  Click on the download button. We checked and it works fine on Chrome and Safari.
  Reply